Portable EV Charger 32A Type 2 – 22 kW 3-Phase Mobile Fast Charging Solution

Unlock the fastest portable charging available with the Ladergy Portable Charger 32A Type 2 22 kW – a high-performance, three-phase mobile station delivering up to 22 kW on a dedicated 400V 3-phase connection. Ideal for workshops, homes with industrial 3-phase power, fleet operators, or rapid top-ups during travel. This is the top-tier portable option for EVs that support high AC charging rates, complementing your fixed AC Wallbox installations.

Key Features & Benefits

• Maximum Power Output : Up to 22 kW (3-phase, 32A per phase at 400V) – adds approx. 100–140 km of range per hour (depending on your EV's onboard charger; eg, many modern EVs accept 11–22 kW AC).
• Type 2 Connector (IEC 62196-2) – Compatible with nearly all European electric vehicles and plug-in hybrids (Tesla Model 3/Y/S/X with adapter, VW ID.3/ID.4/ID.Buzz, BMW iX/i4/i7, Mercedes EQ series, Hyundai Ioniq 5/6, Kia EV6/EV9, Renault Scenic E-Tech, Peugeot e-3008, Audi Q4/Q8 e-tron, Porsche Taycan at reduced rate, etc.).
• Adjustable Charging Current : Set from 6A to 32A (in steps, often 1A increments) via control box buttons, display, or app (if Wi-Fi enabled) – safely match your outlet's capacity or reduce power on weaker circuits.
• Three-Phase Input : Requires a CEE 32A 5-pin red industrial socket (3-phase 400V + neutral + PE) for full 22 kW. Can fallback to single-phase at reduced power (~7.4 kW max on one phase).
• Advanced Safety Protections : Integrated RCD (Type B or A + DC 6mA leakage detection), overcurrent, overvoltage/undervoltage, overheating, short-circuit, ground fault, and temperature monitoring. High IP rating (typically IP65/IP66/IP67 for control box) – suitable for outdoor and harsh conditions.
• Cable & Plug : 5–7 m durable charging cable (Type 2 to vehicle) + input cable with CEE 32A 5-pin red plug. High cross-section (eg, 6 mm²+) for minimal voltage drop and heat.
• User Interface : LED indicators, LCD/IPS display for real-time status (current, power, faults, charging progress), and often Wi-Fi/app control for remote monitoring, scheduling, and adjustments.
• Plug & Play Convenience : No fixed installation – connect directly to a qualified 3-phase 32A CEE outlet (installation by SEP-qualified electrician strongly recommended in Poland).
• Certifications : CE marked, compliant with IEC 61851-1, EN 62752 (Mode 2 portable EVSE), RoHS, and EU safety standards.

Technical Specifications

What's in the Box

• Portable EV Charger with Type 2 connector
• Control box (with display/buttons/Wi-Fi if applicable)
• CEE 32A 5-pin red 3-phase input plug
• User manual, warranty card
• Carrying bag/case (common for portable models)

Important Notes & Safety

• Dedicated 3-phase 400V 32A CEE socket required for 22 kW – must be installed/professionally checked by an electrician with SEP qualifications. Single-phase use limits output to ~7.4 kW.
• Direct socket connection only – extensions must be rated for 32A 3-phase with sufficient cross-section to avoid overheating, voltage drop, or safety issues.
• For daily home use, fixed Wallbox chargers are more convenient; this excels in high-power portable scenarios.
• Improper setup or use can void warranty and create hazards – always verify socket compatibility.
• Compatible with EVs that have Type 2 inlet and onboard charger supporting up to 22 kW AC (check your vehicle's specs; many cap at 11 kW).